半導体CV特性測定器 TECHMIZE 型式:TH511【国内正規品】
  • 半導体CV特性測定器 TECHMIZE 型式:TH511【国内正規品】
  • 半導体CV特性測定器 TECHMIZE 型式:TH511【国内正規品】

製品名

半導体CV特性測定器 TECHMIZE 型式:TH511【国内正規品】

価格

2,880,000円(税込)

型番

TECHMIZE 型式:TH511

メーカー

用途

概要

■製品仕様:
Ciss、 Coss、 Crss、 Rg、 スポット・テスト、
リスト・スキャン、 テスト周波数: 1kHz-2MHz、
VGS: ±40V、 VDS: ±200V、 2チャンネル

■アプリケーション

• 半導体コンポーネント/電力コンポーネント

ダイオード、トライオード、MOSFET、IGBT、サイリスタ、統合回路、光電子チップなどの寄生容量テストおよびC-V特性分析

• 半導体材料

ウェハー、C-V特性分析

• 液晶材料

弾性定数分析

• 電気容量要素

コンデンサC-V特性テストおよび分析、電気容量センサーテストおよび分析

 

Specifications

Model TH511 TH512 TH513
Channel 2 (4/6 Ch Optional) 2
Display Display 10.1-inch capacitive touchscreen
Ratio 0.672916667
Resolution 1280*RGB*800
Test Parameter Ciss, Coss, Crss, Rg. Four parameter selectable arbitrarily
Test Frequency Range 1kHz-2MHz
Accuracy 0.0001
Resolution 10mHz          1.00000kHz-9.99999kHz
100mHz        10.0000kHz-99.9999kHz
1Hz                100.000kHz-999.999kHz
10Hz              1.00000MHz-2.00000MHz
Test Level Voltage Range 5mVrms-2Vrms
Accuracy ± (10%*Setting Value+2mV)
Resolution 1mVrms           5mVrms-1Vrms
10mVrms         1Vrms-2Vrms
Vgs Range 0 – ±40V
Accuracy 1%* Setting Voltage+8mV
Resolution 1mV                 0V – ±10V
10mV               ±10V – ±40V
Vds Range 0 – 200V 0 – 1500V 0 – 3000V
Accuracy 1%* Setting Voltage+100mV
Output Impedance 100Ω, ±2%@1kHz
Computation Absolute deviation Δ from nominal value, percent deviation from nominal value Δ%
Calibration Function OPEN, SHORT, LOAD
Measure Average 1-255 times
AD Conversion Time (ms/time) Fast+: 0.56ms (>5kHz), Fast: 3.3ms, Middle: 90ms, Slow: 220ms.
Basic Accuracy 0.001
Ciss, Coss, Crss 0.00001pF – 9.99999F
Rg 0.001mΩ – 99.9999MΩ
Δ% ±(0.000% – 999.9%)
Multi-Function Parameter List Scan Spots 20 spots, the average number can be set for each spot, and each spot can be sorted separately
Parameter Test Frequency, Vg, Vd, Channel
Trigger Mode Sequence SEQ: After one trigger, measure at all sweep points, /EOM/INDEX output only once.
Step: perform a sweep point measurement per trigger, each point outputs /EOM/INDEX, but the list scan comparator result is only output at the last /EOM
Graphic Scan Scanning Spots Any Spot is optional, up to 1001 Spots
Result Display Multiple curves with the same parameter and different Vg;
multiple curves with the same Vg and different parameters.
Display Range Real-time automatic, locked
Coordinate ruler Logarithmic, linear
Parameter Vg, Vd
Trigger Mode Single Manual trigger once, complete one scan from the start spot to the end spot, and start a new scan with the next trigger signal
Continuous Infinite loop scan from the start spot to the end spot
Result Storage Graphics, files
Comparators Bin 10Bin, PASS, FAIL
Bin Deviation Setting Deviation, Percent Deviation, Off
Bin Mode Tolerance, continuous
Bin Count 0-99999
Bin Judgement A maximum of four parameter limit ranges can be set for each bin. The corresponding bin number will be displayed within the setting range of the four test parameter results. If it exceeds the set maximum bin number range, FAIL will be displayed. Test parameters without upper and lower limits will be automatically ignored.
PASS/FAIL indication Satisfy Bin1-10, the PASS light on the front panel is on, otherwise the FAIL light is on.
Data Storage 201 measurement results can be read in batches
Storage File Internal About 100M non-volatile memory test setup file
External USB Test setup files, screenshots, log files
Keyboard Lock Lockable front panel buttons, other functions to be expanded
Interface USB HOST 2 USB HOST interfaces, which can be connected to the mouse and keyboard at the same time, and only one U disk can be used at the same time
USB DEVICE Universal Serial Bus socket, small type B (4 contact positions); compliant with USB TMC-USB488 and USB2.0, female connector for connecting external controllers.
LAN 10/100M Ethernet, 8 pins, two speed options
HANDLER Used for Bin signal output
RS232C Standard 9-pin, crossed
RS485 Can receive modification or external RS232 to RS485 module
Boot Warm-up Time 60 Minutes
Input voltage 100-120VAC/198-242VAC Option, 47-63Hz
Power consumption More than 130VA
Dimensions (W*H*D) mm 430*177*405
Weight 12kg

 

Accessary

Standard
Accessories name Model  
Test Fixture TH26063B
Test Fixture TH26063C
TH510 fixture control connection cable TH26063D
TH510 Test Extension Cable TH26063G

 

Downloads

Specification of TH510 series 2023.08.pdf  Download
TH510 Series English Manual.pdf Download